How to Remove the Engine Air Filter from a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Air filter

See other generations:

This video is currently unavailable

In this video, see how to remove the engine air filter from a Fiat Panda. Open the car door, pull up the lever to open the engine compartment located at the bottom left of the dashboard, and lift the front bonnet, securing it with the prop rod. Remove the soundproofing panel of the engine (where the filter is located); open the air box (unscrew the securing screws), remove the cap of the filter box, and extract the worn air filter.

Insert a new filter into the designated housing (ensuring it fits snugly around the walls). Finally, refit the cap of the air box and tighten the screws.

Close the front bonnet after maintenance.

Updated on 13 March 2026 by ScegliAuto

Other guides you may be interested in

Air Filter - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Car Door - Maintenance and repair on other vehicles

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!

by ScegliAuto

How to Remove the Engine Air Filter from a Fiat Panda

Related tutorials

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

More videos