Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Maintenance Reset on a Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Warning light – error code

In this video, see how to reset the oil maintenance light on a Fiat Ducato. This is a very simple operation. Enter the vehicle and turn on the ignition using the button next to the steering wheel. Turn off the ignition, then press the brake pedal five times in succession. Release the brake pedal, turn off the ignition again, then turn it back on and wait for the light to illuminate. Finally, check the changes made to the vehicle. Always remember to make changes to the onboard computer while the vehicle is stationary and turned off.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on a Fiat Ducato JTD
Resetting the service light on a Fiat Ducato JTD
Fiat Ducato (2006-2014 / X250) In this guide video, we will see how to reset the service light for the regular maintenance oil change on a second-generation Fiat Ducato. First, get…
Reset the Engine Oil Warning Light on Fiat Ducato
Reset the Engine Oil Warning Light on Fiat Ducato
Fiat Ducato (2014-2026 / X290) Below are the instructions to reset the maintenance warning light for the engine oil change on the Fiat Ducato. First, get inside the vehicle and pre…
Resetting the Service Light on the Fiat Ducato
Resetting the Service Light on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) This brief and simple guide shows you how to reset the service light for the routine maintenance oil change on the Fiat Ducato using diagnostic softw…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - What does the red engine light on the Fiat Ducato 2 indicate? Read answer
    • Ducato 2002-2006 - Meaning of the dashboard warning lights on the Fiat Ducato? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos