Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Battery on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Battery

See other generations:
Video tutorial

Is the Panda's battery out of order? Here’s how to remove it. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet, disengaging the locking lever with your fingers.

Secure it in place.

Once the engine compartment is open, you will find the damaged battery. Remove the securing bolts from the battery terminals, then detach the fabric or metal clamp.

Take it out of the engine compartment and replace it with a new one (same voltage). Close the engine bonnet after maintenance.

Start the vehicle's engine.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Fiat Panda 1.3 MultiJet
Fiat Panda (2012-2026 / 319, MK 3) In this video, you will learn how to replace the battery on a Fiat Panda 1.3 MultiJet. Before replacing the battery, ensure you have purchased the co…
How to Replace the Thermostat on a Fiat Panda
How to Replace the Thermostat on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the thermostat from a Fiat Panda by yourself? Let's see in the video where and how to remove the thermostat. Remove the panel covering …
How to Remove and Replace the ECU of the Fiat Panda
How to Remove and Replace the ECU of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This guide illustrates the main steps to remove and replace the ECU of the Fiat Panda, following the instructions below. First, open the bonnet of th…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos