Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Reverse Light Bulb on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Light bulb

In this video tutorial, you will learn how to replace the reverse light bulb on a Fiat Panda. The bulb in question is a 10-watt, 12-volt bulb. To replace it, access the wheel arch and locate the bulb holder: then detach the bulb holder by turning it a quarter turn counterclockwise and pull the cable towards you. The bulb is a bayonet type, so simply pull it out to remove it. At this point, fit the new bulb by pushing it into the bulb holder. Use high-quality, long-lasting bulbs!

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Fiat Panda 3
How to replace the rear headlight bulb of the Fiat Panda 3
Fiat Panda (2012-2023 / ) If you own a Fiat Panda Mk3 and want to replace the bulb of one of the rear lights on your own, all you have to do is carefully read and follow the f…
Replacing the H4 Bulb on a Fiat Panda
Replacing the H4 Bulb on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the H4 bulb of the front headlight on a Fiat Panda, you need to access the engine compartment by opening the bonnet. Locate the bulb to be…
How to replace the front headlight bulb of the Fiat Panda
How to replace the front headlight bulb of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replacing the front headlight bulb of your Fiat Panda is really very simple and to complete the operation you just need to follow the procedure descr…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How many reversing lights are there on the Fiat Panda? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos