Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Pump from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel pump

See other generations:
Video tutorial

In this video tutorial, you will learn how to replace the fuel pump on a Fiat Panda. First, you need to remove the rear seats as the pump is located underneath.

Then, unscrew the plastic cap covering the pump. At this point, disconnect the float connector and unplug the electrical connectors.

Now, unscrew the retaining ring with a sharp object or the appropriate tool to extract it. Then, replace it with the new one and reconnect the connectors. Refit the rear seats, and you will have completed the job!


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump Relay on a Fiat Panda
How to Replace the Fuel Pump Relay on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the front bonnet of your Fiat Panda. The fuel pump relay is located inside the fuse box, which is in the engine compartment nea…
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, you will learn how to remove and replace the fuel pump or low-pressure fuel sender on a Fiat Panda 4x4 (169). First, open the rear …
Replacing the Fuel Pump and Float on a Fiat Panda 169
Replacing the Fuel Pump and Float on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video guide, you will learn how to disassemble and replace the fuel float pump on a Fiat Panda 169. First, remove the bolts from the rear sea…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos