Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the grille from above the bumper of a Doblo

Model: Fiat Doblo 223, Doblo 1, MK 1 - Years 2000-2009
Part: Trim cover

Remove the grille from above a Fiat Doblo? Let's see how the front bumper is removed from above. With a special screwdriver we go to unscrew the screws above the mask and the bumper. We unhook the grille from above the bumper. Once the grille plastics have been released, we remove the grille from the bumper. We mount the new mask in the bumper of the car by pressing on it until it locks into the bumper. We screw the clamping screws to the sides of the template. We check the correct assembly of the parts of the mask. The grille must not move from above the bumper.

Posted on 28 September 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front bumper of the Fiat Doblo
How to remove the front bumper of the Fiat Doblo
Fiat Doblo (2009-2021 / MK 2, 263, Doblo 2) The steps to follow to remove the front bumper of the Fiat Doblo are: The first step is to remove the clips that protect the screws. The second step …
Removing the front headlight on Fiat Doblò 1
Removing the front headlight on Fiat Doblò 1
Fiat Doblo (2000-2009 / 223, Doblo 1, MK 1) Let's see in this video how to remove the headlight on a first series Fiat Doblò in simple and quick steps. First we open the engine hood of our car;…
Removing the Front Headlight of the Fiat Doblò
Removing the Front Headlight of the Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, 263, Doblo 2) Below are the instructions to remove and replace the front headlight of the Fiat Doblò. First, open the bonnet of the vehicle and start by removing t…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos