Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Engine oil

See other generations:
Video tutorial

How do you change the engine oil in a Fiat Panda? First, open and lift the front bonnet, then secure it. Raise the car on a jack and unscrew the oil sump plug; let the oil drain into a container. Using a chain wrench, unscrew the oil filter located under the engine bay (as shown in the video).

Remove the filter and fit a new one. Lower the car off the jack and top up the engine with new oil. Close the front bonnet, get into the vehicle, and start the engine to check the operation of all parts.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil in a Fiat Panda
How to Replace the Engine Oil in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the front bonnet of your Fiat Panda. Begin by unscrewing and removing the top cap where the engine oil is added, then lift…
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let’s discover the procedure to perform routine maintenance by replacing the engine oil and oil filter on the Fiat Panda 169 4x4. First, lift the veh…
How to Change the Engine Oil of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Change the engine oil on a Fiat Panda. This operation is simple if you follow the correct steps. Lift the car on a column lift or jack, unscrew the o…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How much engine oil does the fuel tank of the Panda 1 2 petrol contain? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos