Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Removing the Blue&Me Control Unit from a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Control unit

Here are the main instructions for removing the Blue&Me control unit from a second generation Fiat Bravo. First, get inside the car and open the glove compartment, as it is located inside. Next, unscrew the two Torx screws to remove the Blue&Me control unit, then disconnect the electrical connector by pressing the tab and pulling it upwards. It is advisable to disconnect the battery terminals before performing this operation. To reinstall the control unit, simply follow the reverse procedure of disassembly!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…
Fiat Bravo (2007-2014 / Bravo 2) Using a thin but sturdy plastic tool, lever the side indicator out of your Fiat Bravo. Once done, disconnect the outer cover of the indicator from th…
Fiat Bravo (2007-2014 / Bravo 2) In this video, you will see the instructions for removing the original radio to replace it with a 2 DIN unit in a second series Fiat Bravo. First, ge…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos