Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Filter on Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Cabin air filter

To access the cabin air filter, or pollen filter, work in the lower area on the front passenger side. However, before reaching it, open the glove compartment and remove the right internal clip as shown in the video. Once removed, take out the entire glove box. At this point, manually remove the lower plastic cover that leads to the centre tunnel, the one furthest forward. Open the grille that acts as a cover for the pollen filter and extract it. Insert the new filter, ensuring the correct orientation, and reassemble everything in reverse order.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Filter on a Fiat Punto 188
Replacing the Cabin Filter on a Fiat Punto 188
Fiat Punto (1999-2011 / MK 2, 188) Open the passenger side door and access the cabin by moving the passenger seat back. The cabin air filter is located under the dashboard. Locate the …
Cabin Filter Replacement on Fiat Punto
Cabin Filter Replacement on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Let’s look at replacing the cabin filter on a Fiat Punto. Remove the cover located at the bottom right of the dashboard, and get a screwdriver or a c…
Replacing Air Filter on Fiat Grande Punto
Replacing Air Filter on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, we will see how to remove and replace the air filter on a Fiat Grande Punto. First, open and lift the bonnet of your car and …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the cabin filter on the Fiat Grande Punto? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos