Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Service warning light

Want to reset the maintenance light on a Fiat 500? Here’s how to do the reset. Turn on the ignition with the key, press the accelerator pedal three times in quick succession, then release the pedal. Turn off the ignition and remove the key from the ignition lock. Reinsert the key and turn on the ignition again, waiting for the light to illuminate. Check the changes made to the vehicle. Always remember to perform onboard computer modifications with the engine off. Use the information display on the instrument cluster.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset Oil Service on Fiat 500
Reset Oil Service on Fiat 500
Fiat 500 (2007-2021 / 312) How do you reset the oil service light? Follow these steps to reset the service on a Fiat 500. Enter the vehicle and turn on the ignition with the ke…
How to reset the Service light on a Fiat 500 Abarth?
How to reset the Service light on a Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) To reset the Service light on a Fiat 500 Abarth, connect a diagnostic tool to the vehicle's OBD port, located on the dashboard just below the steerin…
How to Reset the Service Light on the Fiat 500
How to Reset the Service Light on the Fiat 500
Fiat 500 (2007-2021 / 312) In this guide, you will learn how to reset the service light for the regular oil change maintenance on the Fiat 500 312 by following these simple ste…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos