Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Warning light – error code

To reset the service light on your Fiat Ducato, follow this procedure: press the accelerator pedal fully down and keep it pressed, then turn on the instrument panel (not the engine, just the panel) by turning the ignition key. Now, while still holding the accelerator pedal down, press the brake pedal seven times fully. After doing this, wait ten seconds before turning off the panel. Start the engine and check that the procedure was successful. Remember not to perform the reset as a substitute for the service but only after it.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the 2006 Fiat Ducato
How to reset the service light on the 2006 Fiat Ducato
Fiat Ducato (2006-2014 / X250) The steps following the service light reset should only be carried out after servicing the vehicle, as an incorrect procedure could cause issues with…
Resetting the service light on a Fiat Ducato
Resetting the service light on a Fiat Ducato
Fiat Ducato (1981-1993 / MK 1) Hello! Today we will explain how to reset the service light on a Fiat Ducato. It is important to remember that this step should only be done after pe…
How to reset the service light on the Fiat Ducato
How to reset the service light on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Today's information will show us how to reset the maintenance service light for the engine oil change on the Fiat Ducato. First, get in the vehicle a…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - What does the red engine light on the Fiat Ducato 2 indicate? Read answer
    • Ducato 2002-2006 - Meaning of the dashboard warning lights on the Fiat Ducato? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos