Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Shock Absorber

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shocks

See other generations:
Video tutorial

Loosen the wheel nuts and lift the vehicle, securing it safely. Unscrew the bolts and remove the wheel.

Unscrew and extract the retaining pins of the arm from the suspension using a 16 mm spanner and push them out. Use penetrating spray to facilitate the operation. Also disconnect the steering tie rod. Using a fixed spanner and a ratchet, remove the suspension bolts and detach the shock absorber.

Remove the protective grille in the engine bay with a 16 mm spanner, unscrew the three bolts at the top of the suspension, and perform the same operation on the other shock absorber after removing the expansion tank. Remove the entire suspension assembly and clean off any deposits with a wire brush.

Using the appropriate equipment, compress the spring to allow for the removal of the old shock absorber and replace it with a new one. Also replace the spring and rubber boot. Reassemble the suspension on the vehicle in reverse order.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Shock Absorber on Fiat Punto
How to Remove the Front Shock Absorber on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Carefully follow these steps to remove the front shock absorber on a Fiat Punto: first, loosen the wheel nuts, lift the car on a column lift, and rem…
How to Replace the Front Shock Absorber
How to Replace the Front Shock Absorber
Fiat Punto (1999-2011 / MK 2, 188) Lift the car on a ramp and raise it to a comfortable working height. Remove the front tyre. Now detach the brake cable and brake oil supply from thei…
Replacing Front Shock Absorbers on Fiat Punto
Replacing Front Shock Absorbers on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will see how to remove and replace the front shock absorber on a Fiat Punto. First, remove the front wheel, then take out…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos