Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Steering wheel

Disconnect the battery by simply removing the negative terminal. Ensure the car is on a level surface with the steering wheel straight. As shown in the video, undo the universal joint under the steering wheel. Inside this, there are three screws marked by holes in the plastic, which you will need to remove. Now the airbag support will come off; pry it off and disconnect the airbag and horn connectors. In the centre of the steering wheel, you will notice a rubber cap: remove it as it covers the 24 mm nut that secures the steering wheel (to assist, engage the steering lock). Nothing simpler!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Steering Wheel on a First Series Panda
Replacing the Steering Wheel on a First Series Panda
Fiat Panda (2003-2012 / 169, MK 2) Removing the steering wheel from a Fiat Panda? This operation is not too complex, let's see how to do it. Disconnect the battery terminals in the eng…
How to Remove the Driver's Airbag from a Fiat Panda
How to Remove the Driver's Airbag from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the driver's airbag (steering wheel) from a Fiat Panda? This operation is straightforward if you follow the steps: insert a medium-leng…
How do you remove the steering wheel of the Fiat Panda?
How do you remove the steering wheel of the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) In order to remove the steering wheel of the Fiat Panda, you need to pry with a screwdriver inside the two holes located on the rear side of the stee…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos