Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Battery

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Battery

See other generations:
Video tutorial

The battery is located in the engine bay. First, loosen the nut on the negative terminal and remove it from the battery, then loosen the nut on the positive terminal and pull it away from the battery. Unscrew the nut located on the right side of the battery, removing the retaining plate at the bottom.

Extract the battery from its housing using the designated handles. Install the new battery and secure it properly with the screw and corresponding plate.

Clean the battery terminals with sandpaper or a cloth. Position the terminal on the positive post, pushing it down firmly and tighten the retaining nut, then perform the same operation with the negative terminal.

Do not dispose of the used battery in the environment; take it to the appropriate collection centres.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Removal and Replacement of the Battery
Removal and Replacement of the Battery
Fiat Punto (1999-2011 / MK 2, 188) The battery is secured in the engine bay. First, loosen the nut on the negative terminal and remove it, keeping it away from the battery. Next, loose…
Removing the Fuse Box to Replace the Fog Light Bulb
Removing the Fuse Box to Replace the Fog Light Bulb
Fiat Punto (1999-2011 / MK 2, 188) The first step is to disconnect the battery cable to avoid any short circuits. Disconnect the negative terminal first, followed by the positive termi…
Replacing the Battery on Fiat Punto
Replacing the Battery on Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replacing the battery is a straightforward procedure on almost all car models, including Fiat. With the engine off and the handbrake engaged, lift th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos