Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Dashboard Parts on a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Dashboard

In today's video, you will see the steps to dismantle all the dashboard parts on a Fiat 500. Get in the vehicle and start by removing the plastics under the steering wheel by unscrewing the securing screws; then proceed to remove the instrument cluster and the air vents by prying at the sides. At this point, remove the central part of the dashboard, starting with the removal of the radio and the central air vents; then remove the plastic panel for the climate control switches and the central tunnel for the gear lever: follow the video to the end to fully understand all the steps!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Differential Assembly on a Fiat 500
How to Dismantle the Differential Assembly on a Fiat 500
Fiat 500 (1957-1975 / Epoca) In this video, learn how to dismantle the differential assembly on a Fiat 500. Use a screwdriver to remove (if necessary) the sleeves, caps, and flan…
How to Replace the Rear Suspension on a Classic Fiat 500
How to Replace the Rear Suspension on a Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) To replace the rear suspension on a classic Fiat 500, lift the car using a ramp or jack so that the wheels are not in contact with the ground. Once l…
How to Remove and Clean the Distributor on a Fiat 500
How to Remove and Clean the Distributor on a Fiat 500
Fiat 500 (1957-1975 / Epoca) In this video, learn how to remove and clean the distributor on an old model Fiat 500. Use a screwdriver to separate the plastic of the distributor, …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos