Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Dismantling the Dashboard of a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Dashboard

In this video tutorial, you will see the essential steps to dismantle the dashboard of a Fiat 500. First, get inside the car and remove the plastic cover under the steering wheel by unscrewing the fixing screws; then remove the lower plastics around the steering wheel, disconnecting the various electrical connectors. Now, dismantle the climate control switches by prying at the sides and disconnecting the connector; remove the centre console by prying at the sides, and pull out the radio by removing the indicated buttons and using the appropriate tools. Follow the video to the end for complete disassembly!

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the front windshield of the Fiat 500 L
Guide to replacing the front windshield of the Fiat 500 L
Fiat 500 (2012-2023 / 500 L) In this guide we will see the main instructions on how to disassemble and remove the front windshield of the Fiat 500 L. First, we open the hood of t…
Guide to Replacing the Number Plate Lights of a Fiat 500
Guide to Replacing the Number Plate Lights of a Fiat 500
Fiat 500 (2007-2021 / 312) In this short and simple guide, you will understand the steps to disassemble and replace the number plate bulbs of a Fiat 500, following the instruct…
Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Fiat 500 (2014-2022 / 500 X) In today's video, you will see the main instructions on how to remove the front bumper from an Abarth 595 and Fiat 500. First, start by unscrewing al…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos