Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on the Fiat Ducato 2.3 MultiJet (2017)

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Diesel fuel filter

See other generations:
Video tutorial

In today's video, you will see the instructions for removing and replacing the diesel filter on a 2017 Fiat Ducato with a 2.3 MultiJet engine. First, open the bonnet and locate the diesel filter on the right side of the engine bay; you will need to remove the headlamp using a 14 mm socket and a T30 Torx key to unscrew the fixing screws.

After disconnecting the electrical connector for the bulbs and removing the headlamp, disconnect the diesel pipes from the filter, then disconnect the electrical connector; replace the filter as shown in the video!


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Replace the Diesel Filter on a Fiat Ducato
Replace the Diesel Filter on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) Do you want to remove the diesel filter mounted on a Fiat Ducato? Here’s how to do it from within the dedicated compartment. First, lift the front bo…
How to Replace the Diesel Filter on a Fiat Ducato
How to Replace the Diesel Filter on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before starting, open the front bonnet of your Fiat Ducato. Begin by disconnecting the electrical connectors attached to the diesel filter, then disc…
How to Replace the Fuel Filter on a Fiat Ducato?
How to Replace the Fuel Filter on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To replace the fuel filter on a Fiat Ducato, open the bonnet to access the components in the engine bay. On the right side, just below the windscreen…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos