Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Starter motor

Hello everyone! Today, learn how to remove the starter motor installed on a Fiat Punto mk2. First, disconnect the battery. To see it, you will need to remove the air filter box. The starter motor is located beneath the intake manifold, between the engine bay and the gearbox, and you will need to lift the car to work underneath. To remove the starter motor, first unscrew the four screws at its end, then detach the plate by unscrewing the nut on the side cylinder. This can also be opened by unscrewing the four related screws.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on a Fiat Punto 1.2
How to Replace the Starter Motor on a Fiat Punto 1.2
Fiat Punto (1999-2011 / MK 2, 188) Today, discover the guide and steps to remove and replace the starter motor on a Fiat Punto 1.2. First, open the bonnet of the vehicle and begin by r…
Replacement of the starter motor of the Fiat Punto 1.2
Replacement of the starter motor of the Fiat Punto 1.2
Fiat Punto (1999-2011 / MK 2, 188) The following steps will show us how to disassemble and replace the starter motor of the Fiat Punto, with a 1.2 petrol engine. First of all, we open …
How to Remove the Starter Motor on a Fiat Punto
How to Remove the Starter Motor on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Is the car not starting? You likely have issues with the starter motor; let's look at removing the damaged part. Open and lift the bonnet, and secure…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos