Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Crankshaft Pulley on Fiat Cars with MultiJet Engine

Model: Fiat Fiat Various

Video tutorial

Position the jack correctly as shown in the video, lift the car, and remove the front right wheel by loosening the bolts before lifting. Once done, you can remove the small cover now accessible by unscrewing the torx screws.

Now, using a 15 mm socket spanner, lower the tensioner and remove the belt. At this point, unscrew the four bolts that secure the pulley to the crankshaft and remove it. Done! As you can see, it is a very simple operation.

Be careful with the groove when fitting the new pulley. Good luck!


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Fiat 1.9 JTD Engine
Replacing the Timing Belt on a Fiat 1.9 JTD Engine
Fiat Fiat Various The replacement of the timing belt and the related kit including tensioner, bearing, and water pump should be carried out by qualified personnel as a…
How to Time the Timing Chain on a Fiat 1.3 Multijet Engine
How to Time the Timing Chain on a Fiat 1.3 Multijet Engine
Fiat Fiat Various When replacing the timing chain on an engine, it is essential to ensure the engine is timed correctly, meaning the synchronization between the cranks…
Replacing Glow Plugs on 1.3 MultiJet Engines (Fiat, Opel)
Replacing Glow Plugs on 1.3 MultiJet Engines (Fiat, Opel)
Fiat Fiat Various In this tutorial video, you will learn how to remove and replace the glow plugs on 1.3 MultiJet engines found in Fiat and Opel vehicles. First, open …

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos