Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat Ducato?

Model: Fiat Ducato X250 - Years 2006-2014
Part: Service warning light

To begin, you must enter the cabin and sit on the driver’s side. Start by pressing the brake and accelerator pedals simultaneously with the instrument panel off. While continuing to press the pedals, turn the key, which will power up the instrument panel without starting the engine. Keep pressing for about 20 seconds until the message "Change Engine Oil" appears on the display and starts flashing. Once this message begins to flash, turn off the instrument panel and then turn it back on. When you have powered it back up, the message "Change Engine Oil" will have disappeared, and you will have successfully completed the reset.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2013 Fiat Ducato
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will find instructions on how to perform the routine maintenance service and reset the service light on a 2013 Fiat Ducat…
How to Reset the "Service" Light on a Fiat Ducato
How to Reset the "Service" Light on a Fiat Ducato
Fiat Ducato (2002-2006 / ) Before starting, sit in the driver's seat of your Fiat Ducato. Begin by activating the instrument panel by turning the key in the ignition. Next, pre…
How to Reset the Service Light on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) On the Fiat Ducato, to reset the Service light, insert the ignition key into the ignition switch and turn it to power on the instrument cluster. Once…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos