Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Oil and Oil Filter on the Fiat Doblò 1

Model: Fiat Doblo Doblo 1, MK 1, 223 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Oil filter

See other generations:
Video tutorial

In this video, you will see how to carry out the routine maintenance service for an oil change, replacing the engine oil and oil filter on the first series Fiat Doblò. First, lift the vehicle and remove the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter located at the bottom of the engine bay: use a 27 mm socket spanner.

At this point, replace the cartridge and the seal with new ones, following the video to the end!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on the Fiat Doblò 1.6 Multijet
How to Replace the Oil Filter on the Fiat Doblò 1.6 Multijet
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) In this video, you will learn how to replace the oil filter on the Fiat Doblò 1.6 Multijet. Open the engine bonnet and remove the oil dipstick. Now l…
Oil and Engine Oil Filter Replacement on Fiat Doblò
Oil and Engine Oil Filter Replacement on Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Lift the vehicle with a jack and secure it with axle stands. Open the bonnet and unscrew the oil filler cap. Position a container under the oil sump …
How to reset the oil light on the 2017 Fiat Doblo
How to reset the oil light on the 2017 Fiat Doblo
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) In standard situations, the oil light on a 2017 Fiat Doblo vehicle activates after 20,000 km, or when the engine oil is replaced. In these cases, we …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos