Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Coolant Temperature Sensor on a 2007 Fiat Punto 188

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine coolant temperature sensor

See other generations:
Video tutorial

The coolant temperature sensor is crucial for the proper functioning of the engine; it provides information about the coolant temperature and sends a signal to an indicator on the dashboard of your vehicle. To replace the temperature sensor, first ensure the engine is cold and not running.

Lift the bonnet and remove the air filter box using a screwdriver and a spanner. Drain the coolant by disconnecting the hose, then remove the clip and detach the thermostat from the hose; insert the new sensor into the hose.

Apply black paste to the gasket and reposition the hose, tightening it. Open the bleed valves to allow the coolant to flow. Reconnect the electrical connector and finally check that the coolant level is correct.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Remove the Temperature Sensor in a Fiat Punto
How to Remove the Temperature Sensor in a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How to remove the thermostat from inside the engine bay of a Fiat Punto? Here’s how to do it in a few steps. Lift the front bonnet of the car, and re…
Replacing the Coolant in the Fiat Grande Punto 1.3 Multijet
Replacing the Coolant in the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, we will learn how to replace the coolant in the Fiat Punto. First, open the bonnet of your car and start disconnecting the hose from the coola…
How to Change the Thermostat on the Fiat Grande Punto 1.4
How to Change the Thermostat on the Fiat Grande Punto 1.4
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, discover the main instructions for removing and replacing the coolant thermostat on the Fiat Grande Punto 1.4 petrol. First, open the …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the external temperature sensor of a Fiat Punto located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos