Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on the Fiat Punto 1.1 - Panda - 500 1.2

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Spark plugs

In today's video tutorial, you will learn how to remove and replace the engine spark plugs on the Fiat Punto second series, as well as on the Panda and the 500 with 1.1 and 1.2 engines. First, open the bonnet of your car and start by removing the plastic engine cover, if present; then remove the four spark plug leads by pulling them upwards. At this point, use a socket wrench with an extension to unscrew and remove the spark plugs, as shown in the video. Finally, replace them with new ones, following the video tutorial to the end!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Fiat Grande Punto?
How to Replace the Spark Plugs on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the spark plugs on a Fiat Grande Punto, open the bonnet to detach the plastic cover on top of the engine block. Once the cover is removed,…
How to Remove the Spark Plugs from a Fiat Punto
How to Remove the Spark Plugs from a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the spark plugs from a Fiat Punto? Open the front bonnet and proceed with the spark plug removal. Lift the bonnet and secure it, then r…
How to Replace the Spark Plugs on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the spark plugs on a Fiat Grande Punto, open the bonnet to remove the plastic cover from the top of the engine bay by loosening the screws…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos