Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disassemble and Install the Dashboard Display on the Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2021
Part: Dashboard

In this video tutorial, you will learn how to disassemble the central part of the dashboard and install a 2 Din Android radio in the Fiat 500, including the Abarth version. First, get in the car and remove the radio by disconnecting the electrical connectors at the back; then, remove the air vents as shown in the video. At this point, install the new multimedia system, making the necessary wiring modifications and, if needed, adjustments to the instrumentation; follow the video to the end to fully understand all the steps!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install the rearview mirror with camera on the Fiat 500 Abarth
How to install the rearview mirror with camera on the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Today's main instructions will show us how to install the rearview mirror with rear camera on the Fiat 500 Abarth. First, we get on board the car and…
Where is the OBD port located on the 2017 Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) Being able to independently locate the OBD port inside your 2017 Fiat 500 Abarth can be difficult as the OBD port in question is well hidden inside t…
How to Remove the Radio from the Fiat 500 Abarth
How to Remove the Radio from the Fiat 500 Abarth
Fiat 500 (2007-2022 / 312) In this video tutorial, you will learn how to remove and replace the standard radio or the entire multimedia system with the corresponding display in…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos