Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Clutch of the Fiat Punto

Model: Fiat Punto MK 1, 176 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999
Part: Clutch

See other generations:
Video tutorial

Today, in this video tutorial, learn how to remove and replace the clutch of the Fiat Punto by following the instructions below. First, open the bonnet and start by lifting the vehicle; remove the front left wheel and take out the battery, air filter box, and various wiring by unscrewing the bolts.

Then, remove the relevant driveshaft by unscrewing all the bolts of the gearbox casing. At this point, remove the flywheel and your clutch, replacing the discs with new ones of the correct type.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Replacing the Clutch on a Fiat Grande Punto
Replacing the Clutch on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, discover the procedure that will show you the main steps on how to remove and replace the clutch discs on a Fiat Grande Punto. First, open the…
Guide to Removing the Clutch from the Fiat Grande Punto 1.2
Guide to Removing the Clutch from the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This brief guide outlines the main steps to remove and replace the clutch of the Fiat Grande Punto 1.2, as well as the Punto Evo. First, open the bon…
How to Bleed the Clutch Pump in the Fiat Punto?
How to Bleed the Clutch Pump in the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To bleed the clutch pump in the Fiat Punto, open the bonnet and unscrew the cap of the reservoir containing the clutch fluid. This will allow you to …

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 1999-2011 - How much does it cost to replace the clutch on the Fiat Punto 1.2 8v? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos