Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the oil change service light on the Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Service warning light

In order to cancel the oil change service indication on the Fiat 500 it is necessary to follow the following procedure: open the door and access the driver's seat, insert the ignition key and turn it to turn on the ignition (do not start the engine). Press the accelerator pedal fully 3 times within 10 seconds, then turn the key and turn off the ignition. Subsequently, to verify that the message has been correctly deleted, turn the ignition on again by turning the key and at that point make sure that the message has actually disappeared.

Posted on 21 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2014-2022 / 500 X) In this short and simple guide we will understand what are the steps that will allow us to reset the service light of the ordinary maintenance of the…
Fiat 500 (2014-2022 / 500 X) Let's see in this short and simple guide a quick and easy way to reset the service light for the ordinary maintenance of the Fiat 500 X oil change. F…
Fiat 500 (2007-2021 / 312) Let's see the instructions on how to reset the oil change routine maintenance service light on an Abarth 500, in very simple steps. After carrying ou…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How to reset the Fiat 500 service warning light? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Remove the Front Door Panel on a Volkswagen Polo

How to remove the driver’s side door panel on a Volkswagen Polo? This video explains the procedure. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to pry off the handle cover (remove the piece), then, with a screwdriver, unscrew the fastening screws in the handle inside the door panel. Unscrew the screws located in the plastic of the door opening lever. Use the lever to detach the retaining clips around the perimeter of the door panel. Finally, grasp the panel with your hands and lever it off the door. Disconnect the cable from the door opening lever and the power connectors for the window switch.

Watch the video!


by ScegliAuto

More videos