Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing and Installing the ECU on the Fiat 500 Abarth

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Control unit

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the ECU of the Fiat 500 Abarth, following the instructions below. First, open the bonnet and disconnect both battery terminals (positive and negative); then, unscrew the bolts of the bracket to remove it, as shown in the video.

Now, use a socket spanner to unscrew the bolts of the battery holder to remove it; then proceed to remove or install the engine control unit, making the electrical connection, following the video to the end!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Replacing the Gear Knob on a Fiat 500 Abarth
Replacing the Gear Knob on a Fiat 500 Abarth
Fiat 500 (2014-2022 / 500 X) For replacing the gear knob on the Fiat 500 Abarth, position the car securely and stably. This precaution should be taken whenever performing mainten…
Where to Find the OBD Port of the 2017 Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Locating the OBD port inside your 2017 Fiat 500 Abarth can be challenging as it is well hidden within the dashboard and not easily visible. Follow th…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - Where is the bluetooth control unit of the Fiat 500 located? Read answer
    • 500 2007-2024 - Ebd failure on Fiat 500, what does it mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos