Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Door Panel from the Fiat Siena

Model: Fiat Siena MK 1 - Years 1996-2017
Part: Car door

To remove the inner door panel of the vehicle, follow these steps: open the door, first remove the screws securing the glove compartment at the bottom (four screws) and remove the screw securing the trim around the door release lever and take it out. Then, remove the screws securing the door handle (screws located under the handle). At this point, use a sharp object to pry up the plastic panel around the window switch and disconnect the clip behind it. After that, unscrew the screws securing the speaker and take it out. Finally, gently pull the panel towards you, releasing the various retaining clips.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the cabin of the Fiat Siena?
Where is the fuse box located in the cabin of the Fiat Siena?
Fiat Siena (1996-2017 / MK 1) If you own a Fiat Siena and want to find out where the interior fuse box is located, just read the following guide and follow the described procedure…
How to Replace the Cabin Air Filter in a Fiat Siena?
How to Replace the Cabin Air Filter in a Fiat Siena?
Fiat Siena (1996-2017 / MK 1) In this tutorial, you will see how to replace the cabin air filter in a Fiat Siena, a very simple and quick operation. You will only need a Phillips …
How to Replace the Cabin Filter in a Fiat Siena?
How to Replace the Cabin Filter in a Fiat Siena?
Fiat Siena (1996-2017 / MK 1) In this tutorial, see how to replace the cabin filter in a Fiat Siena. For this simple and quick operation, you won't need any special tools. The fil…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos