Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Differential Mounts on a Fiat Panda 4x4?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Differential

See other generations:
Video tutorial

To replace the differential mounts on a Fiat Panda 4x4, you need to completely dismantle the rear axle of the car: to do this, lift the vehicle and fully remove the rear wheels. Once these are removed, unscrew the bolts securing the drums and take them off completely.

Then, detach the brake shoes by removing them entirely and proceed to unscrew the bolts that secure the axle to its mounts. Once the axle is completely removed, you can replace the differential mounts and then reinstall the axle.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to replace the rear differential silent blocks on the Fiat Panda 4x4?
How to replace the rear differential silent blocks on the Fiat Panda 4x4?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear differential silent blocks on the Fiat Panda 4x4, first loosen the bolt and nut securing the stabiliser bar at the rear. Once the…
How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, we will see how to change the rear differential oil on the Fiat Panda 4x4 169. Start by lifting the car and locating the p…
How to Remove the Drive Shaft from a Fiat Panda 4x4
How to Remove the Drive Shaft from a Fiat Panda 4x4
Fiat Panda (2003-2012 / 169, MK 2) In this guide, learn how to dismantle the drive shaft and replace the oil seal on a Fiat Panda 4x4. First, raise the vehicle and start unscrewing all…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos