Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Indicator Stalk from the Fiat 500

Model: Fiat 500 312 - Years 2007-2022

In today's video tutorial, you will see the main instructions to remove the indicator stalk for the indicators and sidelights of the Fiat 500. First, open the bonnet and start by disconnecting both battery terminals; then, get inside the vehicle and remove the airbag and steering wheel by disconnecting the electrical connector and undoing the central bolt, as shown in the video. At this point, disconnect the electrical connectors of the indicator stalk until you completely remove it; apply the reverse procedure for reassembly!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from the Fiat 500 X
How to Remove the Radio from the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In today's video, you will learn how to quickly and easily remove the original radio from the Fiat 500 X, as well as from the Fiat 500. First, get in…
How to Remove the Radio from a Fiat 500?
How to Remove the Radio from a Fiat 500?
Fiat 500 (2012-2023 / 500 L) The radio in a Fiat 500 can be removed using special extraction tools. These tools are specifically designed to remove radios from their installation…
How to Remove the Front Door Panel on the Fiat 500 X
How to Remove the Front Door Panel on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In this guide, see the steps that will allow you to remove and replace the front door panel on the Fiat 500 X. First, open the front door and start b…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer
    • 500 2007-2024 - What happens when the "uconnect" on Fiat 500 expires? Read answer
    • 500 2007-2024 - Where is the jack on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos