Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Sump and Oil Pump on the Fiat Punto 2 1.2

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Pump

See other generations:
Video tutorial

In this video, you will see the main instructions for removing the sump and oil pump of the Fiat Punto second series, with a 1.2 petrol engine. First, lift the vehicle and start by unscrewing the oil drain bolt, allowing it to drain into a container for about ten minutes; then unscrew all the side fixing screws to remove the oil sump.

At this point, remove the V-belt and the timing belt; unscrew the fixing screws of the oil pump to remove and replace it, following the video tutorial to the end!


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Remove the Clutch Pump on the Fiat Grande Punto
How to Remove the Clutch Pump on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial, you will see the main steps to remove and replace the clutch cylinder or pump on the Fiat Grande Punto. First, open the bonnet o…
Engine Oil Replacement on a Fiat Punto Evo
Engine Oil Replacement on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Let’s look at the engine oil replacement on a Fiat Punto Evo. Lift the vehicle with a jack, then locate the plug under the oil sump. Unscrew the bolt…
How to replace the oil filter of the Fiat Punto
How to replace the oil filter of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Today we will explain how to replace the oil filter of the Fiat Punto model 118. Before performing the filter replacement, we place a container capab…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos