Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Service Light on a 2017 Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Service warning light

The procedure shown in the video and explained in this tutorial refers to a 500X with an automatic gearbox. For the manual version, refer to the owner's manual. Position the gear lever in "P" (Parking). Press the ignition button once to illuminate the dashboard without starting the engine. Now, press the accelerator pedal fully and slowly 3 times; this operation should take less than 10 seconds. At this point, you can turn off the ignition. If the message reappears when you turn it back on, you will need to repeat the procedure. In any case, it is advisable to check the owner's manual for any doubts.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2014-2022 / 500 X) Let's talk about the Fiat 500X and how to reset its Service light, which indicates when the scheduled maintenance is due. It goes without saying that…
Fiat 500 (2014-2022 / 500 X) In order to reset the Service light of the Fiat 500X, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on…
Fiat 500 (2014-2022 / 500 X) To reset the Service light of the Fiat 500X, you need to insert the ignition key into the ignition switch, so that you can turn it to turn on the ins…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos