Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Resetting the Engine Oil Light on a Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Service warning light

Below are the steps to reset the oil change maintenance light on a Fiat 500X. First, get in the vehicle and turn on the ignition by pressing the start button once. Then, press the accelerator pedal three times, and turn off the ignition as shown in the video. This will initiate the service light reset procedure; wait about ten seconds before turning the ignition back on to complete the oil light reset!

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Fiat 500X
How to Reset the Oil Light on the Fiat 500X
Fiat 500 (2014-2022 / 500 X) If you own the new Fiat 500X with automatic transmission and want to learn how to correctly reset the engine oil light that stays on in the instrumen…
Resetting the maintenance light of the Fiat 500X
Resetting the maintenance light of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) Through these simple steps, we will see how to reset the maintenance light for the engine oil change in the Fiat 500X. After performing the service, …
Resetting the oil light on a Fiat 500X
Resetting the oil light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) You can manually reset the oil light on a Fiat 500X without going to a workshop or using professional diagnostic equipment. To start, sit in the driv…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos