Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Fiat 500x

Model: Fiat 500 500 X - Years 2014-2022
Part: Service warning light

Let's see how to reset the service light (oil change): when the message 'oil change necessary' or 'oil change' appears on the display after performing the oil change, this message will appear every time you start the car, so in this procedure, we will see how to reset the warning light. After performing the oil change, to reset the message, proceed as follows: put the gear lever in Park (P), turn on the instrument panel without starting the engine, slowly press the accelerator pedal three times within 10 seconds, then turn off the instrument panel and turn the ignition back on. If after following this procedure the oil change message does not disappear, repeat the procedure.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2014-2022 / 500 X) .. In this tutorial, you will see how to reset the service light on the Fiat 500X, a very simple and quick operation to be performed only.. …
Fiat 500 (2014-2022 / 500 X) In this video, learn how to reset the oil maintenance service on a Fiat 500X. This is a very simple operation. Enter the vehicle and turn on the inst…
Fiat 500 (2014-2022 / 500 X) We can see how to reset the service light of the Fiat 500X or 500L empirically, without the need for equipment. Turn on the ignition at the first cli…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos