Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Panda
  6. : How to reset the oil service in the Fiat Panda?

Fiat Panda - Video tutorial

Model: Fiat Panda - Years 2012-2021
Part: Checks and maintenance
Operation: How to reset the oil service in the Fiat Panda?

In this video we can see how to reset the service signal in the Fiat Panda, a very simple operation to follow only after carrying out the required maintenance. With the instrument panel off, we keep the accelerator pedal fully depressed and, at the same time, turn on the ignition. Maintaining the accelerator, we press the brake pedal 7 times, wait 60 seconds with the accelerator always pressed and turn off the ignition. Finally, we wait another 60 seconds, at the end of which we will go to start the engine. If the procedure has been followed correctly, the signal in the display will disappear.


Posted on 7 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Panda 1980-2003 - What causes noise in the FIAT Panda 4x4? Read Answer
    • Panda 2012-2023 - What to do if the brake caliper of the Fiat Panda is stuck? Read Answer
    • Panda 2003-2012 - What does the yellow triangle with an exclamation point warning light on the Fiat Panda indicate? Read Answer
    • Panda 2012-2023 - What does the warning light with an exclamation mark inside a triangle indicate in the Fiat Panda? Read Answer
    • Panda 2012-2023 - How much does the first maintenance service for the Fiat Panda Hybrid cost? Read Answer
    • Panda 2012-2023 - When should the Fiat Panda Hybrid be serviced? Read Answer
    • Panda 2003-2012 - What does the injector warning light on the Fiat Panda indicate? Read Answer
    • Panda 2012-2023 - How often does the Fiat Panda Hybrid need to be serviced? Read Answer
    • Panda 2012-2023 - How do you reset the tire pressure warning light on a Fiat Panda? Read Answer
    • Panda 2003-2012 - How often does the Fiat Panda with LPG need to be serviced? Read Answer
    • Panda 2003-2012 - Where is the reverse gear switch located in the Fiat Panda? Read Answer
    • Panda 2003-2012 - What are the dashboard indicators of the Fiat Panda? Read Answer
    • Panda 2012-2023 - Why does the fan of the Fiat Panda 3 turn on frequently? Read Answer
    • Panda 2012-2023 - What does the yellow triangle-shaped warning light on the Panda indicate? Read Answer
    • Panda 2003-2012 - What does the reserve light on the Fiat Panda indicate? Read Answer
    • Panda 2003-2012 - How many kilometers can the Fiat Panda travel with a full tank of petrol? Read Answer
    • Panda 2012-2023 - What does the tire pressure warning light on the Fiat Panda indicate? Read Answer
    • Panda 2012-2023 - When should the Fiat Panda hybrid be serviced? Read Answer
    • Panda 2003-2012 - How many kilometers can the Panda travel in reserve? Read Answer
    • Panda 2012-2023 - How many kilometers can you travel with one liter of gasoline in a Panda car? Read Answer

How to open the Piaggio Beverly saddle with a flat battery

In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos