Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you replace the oil filter on the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2021
Part: Oil filter
Operation: How do you replace the oil filter on the Fiat 500?

To be able to replace the oil filter on the Fiat 500, you have to open the hood to access the engine compartment: the piece is positioned in the front part of the compartment, in correspondence with the left front headlight. To remove it, it will be necessary to unscrew the screw located in the upper part of the box that contains the filter. In this way the box can be completely extracted and opened, removing the filter from inside its housing. The new filter can then be inserted here, which must be re-attached behind the left headlight.


Posted on 16 August 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - Where is the Fiat 500 L oil filter located? Read Answer
    • 500 2014-2022 - How do you replace the engine oil filter in the Fiat 500x Multijet? Read Answer
    • 500 2014-2022 - How to replace the oil filter on the Fiat 500X? Read Answer
    • 500 2014-2022 - How to replace the oil filter on the Fiat 500X? Read Answer
    • 500 2014-2022 - Where is the oil filter located in the Fiat 500L? Read Answer
    • 500 2007-2023 - Where is the Fiat 500 oil filter located? Read Answer
    • 500 2014-2022 - Where is the oil filter on Fiat 500x? Read Answer
    • 500 2014-2022 - How to replace the oil filter on Fiat 500X 1.6 mjt? Read Answer
    • 500 2014-2022 - How much is the oil filter of the Fiat 500 s 2017? Read Answer
    • 500 2007-2023 - Where is the Fiat 500 engine oil filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos