Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
169, MK 2
- Years 2003-2012 In this video tutorial we can see how it is possible to replace the timing belt on Fiat Panda with 1.2 8V engine, following some basic steps: the first thing to do is to buy a new timing belt from an authorized dealer. Lift the bonnet and secure it with the special rod; then we have to disassemble and remove the engine mount as shown in the video; once we have released, we proceed to spin the engine clockwise to the right, until we reach the marks (as shown in the video). Once the mark is reached we can loosen the support and remove the belt from its seat. At this point we can position the new timing belt by proceeding backwards.
Posted on 6 September 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.040
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |