Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Brake pads

As shown in the video, once you have purchased the replacement pads, you need to loosen the wheel bolts. Do this before inserting the jack, as you won't be able to do it afterwards. Remove the bolts, position the jack, lift the car, and remove the wheel. At this point, unscrew the other two bolts inside the wheel using a 15 mm spanner, turning it towards you. Release the retaining pin of the pads and remove the pads themselves. Insert the new ones and, as shown in the video, remove the cap from the brake fluid reservoir. Reinsert the retaining pin on the pads and perform all operations in reverse.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Shoes on a Fiat Panda
How to Replace the Rear Brake Shoes on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear brake shoes on a Fiat Panda, lift the car with a jack or ramp so that the corresponding rear wheel is not in contact with the gro…
How to Replace the Rear Brake Shoes on a Fiat Panda
How to Replace the Rear Brake Shoes on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, see how to replace the rear brake shoes on a second-generation Fiat Panda, produced from 2003 to 2012. First, lift the vehicl…
How to Change the Brake Pads on a Fiat Panda
How to Change the Brake Pads on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Learn how to replace the front brake pads on a Fiat Panda. Lift the car on a column lift (jack) to the desired height, then remove the wheel (with a …

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - How much does it cost to replace the brake pads of a Fiat Panda? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos