Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Fiat Talento

Model: Fiat Talento MK 1 - Years 2016-2021
Part: Service warning light

If you have just changed the engine oil and the warning light continues to appear on the dashboard display, do not worry as this is completely normal. You simply need to manually reset the reading data through a few simple steps. First, insert the key and turn on the ignition without starting the engine. Then navigate through the menu until you find and display the option for the remaining oil life. At this point, locate the button at the end of the right-hand lever on the steering wheel and hold it down for a few seconds. Release it once the display stops flashing, and finally, turn off the ignition.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box Located on the 2019 Fiat Talento?
Where is the Fuse Box Located on the 2019 Fiat Talento?
Fiat Talento (2016-2021 / MK 1) To locate the position of the fuse box in your 2019 Fiat Talento takes just a few seconds. Below, you will find all the instructions you need. First,…
How to Reset the Service Light on the Fiat Talento
How to Reset the Service Light on the Fiat Talento
Fiat Talento (2016-2021 / MK 1) After changing the engine oil at the scheduled maintenance interval for the Fiat Talento, you must proceed to reset the system that alerts you to the…
How to reset the service light on the Fiat Talento
How to reset the service light on the Fiat Talento
Fiat Talento (2016-2021 / MK 1) In today's video, we will see how to make the expired maintenance interval warning message disappear from the onboard computer of the Fiat Talento. T…

Other guides you may be interested in

    Frequently Asked Questions

    • Talento 2016-2021 - How do you reset the service warning light on the Fiat Talento? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos