Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Starter Motor from the Fiat Palio 1.7 TD

Model: Fiat Palio MK 1 - Years 1996-2007
Part: Starter motor

This guide provides instructions for removing and replacing the starter motor on the Fiat Palio 1.7 TD. First, lift the vehicle and locate the starter motor; to access it, you will need to unscrew and remove the engine oil filter, so you must first drain the oil. At this point, unscrew the starter motor mounting screws and then disconnect the power wires; then remove the starter motor and replace it with the new one, reassembling everything!

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Location of the fuse box of the Fiat Palio
Location of the fuse box of the Fiat Palio
Fiat Palio (1996-2007 / MK 1) The Fiat Palio, produced from 2004 to 2010, contains two fuse boxes. The first fuse box is located inside the cabin, specifically behind the left sid…
Where are the fuse boxes of the Fiat Palio located?
Where are the fuse boxes of the Fiat Palio located?
Fiat Palio (2011-2018 / 326) The second generation Fiat Palio contains a fuse box and a relay box inside. The fuse box is located inside the cabin behind the driver's glove compa…
Electrical diagram and fuses of the Fiat Palio
Electrical diagram and fuses of the Fiat Palio
Fiat Palio (2011-2018 / 326) In this video, we see the fuse box and the electrical diagram of the Fiat Palio MK2, where we find a fuse box inside the engine compartment, located …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos