Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Light on Fiat 500 1.3 Multijet

Model: Fiat 500 - Years 2007-2021
Part: Service warning light

In this video tutorial, you can see how to reset the oil light on a Fiat 500 1.3 Multijet by following a few simple steps that will guide you towards proper vehicle management. When you turn on the instrument cluster, the display shows the message "CHANGE ENGINE OIL"; the technique is as follows: turn the key to switch on the instrument cluster, press the accelerator pedal, and simultaneously press the brake pedal seven times. Then, hold the brake pedal for sixty seconds, release the brake pedal first, and then the accelerator pedal. Turn off the ignition and wait sixty seconds before turning it back on. At this point, the reset should be complete.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2021 / 312) In today's tutorial video, you will see step-by-step instructions for performing the routine maintenance oil change on a Fiat 500 1.3 MultiJet. First…
Fiat 500 (2007-2022 / 312) This guide explains how to replace the engine oil and oil filter of the Fiat 500 1.3 MultiJet, following these simple steps. First, lift the vehicle …
Fiat 500 (2012-2021 / ) As shown in the video, to change the oil filter in your Fiat 500 1.3 Multijet, you must first choose the correct filter. There are two types availabl…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos