Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel and Airbag from a Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Steering wheel

Follow the steps below to remove and replace the steering wheel and airbag of the Fiat 500, following the instructions provided. First, get into the vehicle and start by removing the airbag; use a sharp object to push inside the holes found on the back of the steering wheel, disconnecting the electrical connector to remove it, as shown in the video. At this point, unscrew the central bolt of the steering wheel to remove it; then install the new one, securing it properly, and refit and connect the airbag!

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Steering Wheel from a Fiat 500
Removing the Steering Wheel from a Fiat 500
Fiat 500 (2007-2021 / 312) How to remove the steering wheel from a Fiat 500? Here’s how to detach the steering wheel and airbag. Insert a screwdriver into the slots at the back…
How to Remove the Steering Wheel Airbag on a Fiat 500X
How to Remove the Steering Wheel Airbag on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) How to remove the steering wheel airbag on a Fiat 500X? In this video, you will see how to proceed. Before removing the steering wheel, disconnect th…
Removing the Steering Wheel Airbag on Fiat 500
Removing the Steering Wheel Airbag on Fiat 500
Fiat 500 (2007-2021 / 312) Want to remove the steering wheel airbag from the Fiat 500? Enter the cabin and see how to dismantle the airbag. Disconnect the battery terminals, th…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What to do when the steering of the Fiat 500 is locked? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos