Do it yourself
Frequently asked questions about cars and motorcycles

Where is the Inertia Switch Located in the Fiat Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you can see where the inertia switch is located in the Fiat Punto. This component is very important for the vehicle's safety, as it interrupts the fuel supply to the engine in the event of an accident.

As shown, the device is located inside the cabin, specifically in the lower right area of the dashboard on the passenger side. To access it, first unclip the lower internal cover of the door, then remove the panel located beneath the glove compartment.

The switch is identifiable by the presence of a large connector.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the brake pedal switch on the Fiat Grande Punto, first remove the protective panel located near the pedals, just below the steering wheel.…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) These short and simple instructions will show us the process of disassembling and replacing the stop light switch of the Fiat Grande Punto, as well a…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In order to replace the turn signal switch of the Fiat Punto, you will need to remove the airbag located in the center of the steering wheel from its…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos