Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Column of the Fiat 500 X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

See other generations:
Video tutorial

Here are step-by-step instructions on how to remove and replace the steering column or EPS of the Fiat 500 X. First, open the front door and start by removing the plastic cover above the pedal area and below the steering wheel; then unscrew the steering column bolt and remove the ignition button cover, as shown in the video.

At this point, remove the airbag and steering wheel from the car, disconnecting the various electrical harnesses; then proceed to remove the steering angle sensor and subsequently the steering column, following the video tutorial to the end!


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel from a Fiat 500
How to Remove the Steering Wheel from a Fiat 500
Fiat 500 (2007-2021 / 312) Before starting, sit in the driver's seat of your Fiat 500. Begin by unscrewing and removing the screws that secure the airbag to the steering wheel,…
How to Replace the Steering Column on the Fiat 500?
How to Replace the Steering Column on the Fiat 500?
Fiat 500 (2007-2022 / ) To replace the steering column on the Fiat 500, first remove the steering wheel. Loosen the two screws at the bottom of the steering wheel to remove …
General guidelines for replacing the steering angle sensor on Fiat 500 cars.
General guidelines for replacing the steering angle sensor on Fiat 500 cars.
Fiat 500 (2012-2023 / 500 L) In this video we see a common problem with Fiat 500: it happens that when steering, the steering wheel stiffens. This is due to the fact that a senso…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos