Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Thermostat on a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Thermostat

See other generations:
Video tutorial

If you need to replace the thermostat on your Panda, refer to the instructions below and the video. Open the bonnet and locate the coils on the right side of the engine that you need to remove to access the thermostat.

Once the coils are removed, unscrew the support plate underneath. Below the plate, you will find the coolant pipe that you need to detach to access the thermostat, allowing you to unscrew it after draining all the coolant.

Extract the thermostat and replace it with a new one, then reassemble all the components.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Replace the Thermostat on a Fiat Panda
How to Replace the Thermostat on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the thermostat from a Fiat Panda by yourself? Let's see in the video where and how to remove the thermostat. Remove the panel covering …
How to Replace the Thermostat on a Fiat Panda 169
How to Replace the Thermostat on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) It may happen that, due to rust formation in the engine cooling system, the thermostat can jam, preventing the correct exchange between the hot liqui…
How to Remove the EGR Valve on the Fiat Panda 169 1.3 MultiJet?
How to Remove the EGR Valve on the Fiat Panda 169 1.3 MultiJet?
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial, you will learn how to remove the EGR valve on the Fiat Panda 169 with a 1.3 MultiJet engine. First, open the bonnet of your car …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos