Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment of the Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Dashboard

In this video, you will learn how to remove the glove compartment of the Panda 169. First, disconnect the negative terminal of the battery because the airbag module for the passenger side is located in the compartment. You will need to remove five screws that secure the drawer to its housing. Two of these are located externally at the bottom. The other three are inside the drawer (one in the centre and the other two on the sides). Once the screws are removed, disconnect the airbag connector as shown in the video. After this, you can pull the drawer out of its place.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Filter on a Fiat Panda 169
How to Change the Cabin Filter on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Replacing the cabin air filter on a Fiat Panda 169 is very straightforward as the filter is located behind the centre tunnel console and can be easil…
How to Dismantle the Key of a Fiat Panda
How to Dismantle the Key of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In today's video, see how to dismantle the remote key of the Fiat Panda 169 to replace its worn casing. Start by removing the Fiat logo using a screw…
How to Remove the Front Door Panel of a Fiat Panda 169
How to Remove the Front Door Panel of a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Removing the door panel starts with taking off the rubber cover on the mirror adjustment knob, removing the triangular plastic cover located right at…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos