Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cylinder on a Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Clutch

To replace the clutch cylinder on a Fiat 500, open the bonnet to access the components inside the engine bay. You will need to disconnect the battery cables and remove its mounting screws to completely take it out; once the device is removed, you can access the underlying components. Here, you will locate the old cylinder, which can be removed from its housing by unscrewing the mounting bolts and disconnecting the cable; this will allow you to insert the new replacement part and reassemble all the components.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Pedal Switch on a Fiat 500?
How to Replace the Clutch Pedal Switch on a Fiat 500?
Fiat 500 (2007-2021 / 312) To replace the clutch switch on a Fiat 500, access the rear of the clutch pedal. This switch lifts upwards when the clutch pedal is pressed, allowing…
Instructions for Assembling the Engine of the Classic Fiat 500
Instructions for Assembling the Engine of the Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) In this video tutorial, you will see step-by-step instructions for assembling the twin-cylinder engine of the classic Fiat 500 after a proper overhau…
How to Replace the Clutch Pedal on the Fiat 500
How to Replace the Clutch Pedal on the Fiat 500
Fiat 500 (2007-2024 / 312) In this brief guide, you will discover the instructions to disassemble and replace the clutch pedal on the Fiat 500. First, get in the vehicle and re…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos