Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat Doblò

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Service warning light

Let's see how to reset the ordinary maintenance light for the engine oil change on the Fiat Doblò by following these simple and quick steps. First, get in the vehicle and start pressing and holding the accelerator pedal; then turn on the ignition and press the brake pedal seven times, as shown in the video. At this point, turn off the ignition and hold the accelerator pedal for another ten seconds; now release the pedal and turn on the ignition, checking that the service light has been reset!

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in a Fiat Doblò
How to Reset the Service Light in a Fiat Doblò
Fiat Doblo (2022-2026 / Doblo -3) To reset the service light on a Fiat Doblò, completely turn off the instrument panel. Locate the button on the panel and press it. Without releasing …
How to reset the service light in the Fiat Doblò
How to reset the service light in the Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In today's video, see how to reset the service light in the Fiat Doblò. This tutorial also applies to the Opel Combo. Follow these steps: - press the…
Resetting the Service Light on a Fiat Doblò MK2 Using Diagnostics
Resetting the Service Light on a Fiat Doblò MK2 Using Diagnostics
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In this guide, you will find instructions to reset the service light for routine maintenance of the oil change on a second series Fiat Doblò using a …

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2009-2021 - What does the flashing oil warning light mean in Fiat Doblò? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos