Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Freemont
    4. : How to reset the service on the Fiat Freemont.

Fiat Freemont - Video tutorial

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Instrument cluster
Operation: How to reset the service on the Fiat Freemont.

Every time we go to replace the engine oil and filter on this car model, we have to reset the warning light that has come on the dashboard. Below is the necessary procedure: Insert the key without starting the engine. 2- Fully press the accelerator pedal and hold it for 30 seconds. 3- While holding the accelerator pedal, press the brake pedal six times. 4- Turn off the instrument panel. 5- Turn on the instrument panel to verify the actual expiration warning has been turned off, otherwise repeat the procedure.


Posted on 12 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Freemont 2011-2016 - What does the yellow light with a lightning bolt on the Fiat Freemont mean? Read Answer
    • Freemont 2011-2016 - What is the throttle body warning light on the Fiat Freemont? Read Answer
    • Freemont 2011-2016 - What are the dashboard warning lights on the Fiat Freemont? Read Answer
    • Freemont 2011-2016 - Brake warning light on Fiat Freemont, what to do? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos