|
Do it yourself
| |||
| ||||
How to Replace the Spark Plugs on a Fiat Panda.
Model: Fiat Panda
319, MK 3
- Years 2012-2026
In this video tutorial, you can see how to replace the spark plugs on a Fiat Panda with a 0.9-litre Twin Air Turbo petrol/methane engine. The first step is to purchase two new NGK spark plugs; as it is a two-cylinder engine, only two spark plugs are needed. Generally, spark plugs should be replaced between 70,000 and 100,000 miles. The first step is to remove the air filter, so take a 10mm socket and unscrew the bracket that supports the intake. Now unscrew the bolts that hold the air filter in place. The next step is to detach the air filter clamp; for this, you simply need a flathead screwdriver. Now disconnect the intake pipe and the air filter from its housing. Once the filter is removed, the engine is exposed. Take the 10mm socket and detach the two coils where the spark plugs are located underneath. Disconnect the connectors from the coils, then take the coil and gently pull it upwards; now, using a 16mm T-bar socket, unscrew the spark plugs.
Updated on 26 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Panda
(2003-2012 /
169, MK 2)
To replace the spark plugs in a Fiat Panda, open the bonnet to detach the plastic cover on top of the engine block. At the front, you will find the c…
Fiat Panda
(1980-2003 /
141, MK 1)
How do you replace the spark plugs on a Fiat Panda? Let's look at the removal process. Pull the engine compartment release lever and lift the front b…
Fiat Panda
(2003-2012 /
169, MK 2)
In today's tutorial, you will learn how to remove and replace the engine spark plugs on a Fiat Panda 169 1.2 Petrol in simple steps. First, open the …
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.785
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
